This week Trish (our challenge designer for Project Quilting) chose PIXEL PLAY for our 10.4 challenge.
This week, I’d like you to be inspired by these particles, whether you pixelize a picture, make use of low resolution like 8-bit graphics, or are merely inspired by these hard-working colored boxes.
Since I love to work with mosaics, the thought of working with pixels was inspiring. So I’m definitely IN this week. Thanks Trish!
I found a website (Pixel Stitch) that will convert a photo to an embroidery pattern made up of squares. Although it’s made for embroidery, it creates a grid of the pixels in the photo with colors, so it works for pixelated quilt patterns just as well. All I had to do was figure out how big each square would need be to make a reasonably-sized quilt that I might actually be able to finish during a busy week.
Another site (Pic2Pat) does the same thing: http://www.pic2pat.com/index.en.html
We had an juvenile owl, called a “jumper” (because it was just learning to fly), in our back yard a few years ago. You can read about it HERE. It was rescued and placed back in its nest. I’ll never forget the surprise I got when I saw the little guy several days later. He had learned how to fly and was sitting on our back yard fence staring at me with those big yellow owl eyes, almost as if to say “thank you…I’m fine now…and I’m fearless”. I knew that I had to capture the fierce look in those riveting, yet beautiful eyes in a future quilt.
I thought I needed to print the pattern to the full size, but later realized all I really needed was a copy large enough to follow alongside my gridded work surface.
The next decision was what technique to use to get all those little squares (half inch) together on a quilt? The squares are far too small for me to piece. I’ll have to use a raw edge technique. Hmmmmm… how about placing squares on some sort of foundation and stitching over them to keep them in place. But what kind of foundation? I’ve used fusible woven interfacing before and ironed them into place. I’ve also used Steam-a-Seam II. Or I could use a temporary glue on muslin to keep them all in place until they’re stitched down. Or even pin tulle over them before stitching.
I decided to use a technique I used to do the quilt of my father in a previous post. It involves marking a quarter-inch grid on a fusible light weight interfacing and ironing each 1/4″ fabric square to the grid using the printed pattern as my guide.
I placed a shear tulle over the squares before I started free motion quilting.
And the little guy is done! Doesn’t he/she look fearless? And I finished just in time to enter it in this week’s Project Quilting Challenge Season 10.4 (2019).
COME JOIN IN THE FUN…go to their website to see this week’s entries and to vote for you favorites (hope one of them is mine, #36 “Fear-less Owl”, hint, hint). Voting starts Sunday afternoon, Feb. 24th and runs through Friday, March 1st, 2019.
HOW TO VOTE: Just go to the link above, scroll down to the bottom until you see the thumbnail photos of the quilts. Then click on the heart in the upper right hand side of the photo of the entry you want to vote for ❤️ and it’ll fill the heart in & tell you how many votes you have left. If there are over a hundred entries, you’ll get 10 votes. Enjoy!
Until next time, HAPPY QUILTING!